Conasorb F

Conasorb F is a flexible polyester polyurethane foam specifically formulated to absorb airborne and random incidence noise, utilizing minimum weight and thickness.

Conasorb F has a service life greater than that of polyether foams.
The manufacturing control of the cellular structure ensures the optimum ratio of open and closed cells for maximum performance. Conasorb F reduces airborne sound energy in the frequency ranges found in most environments.

Uses

• Enclosure liner
• Acoustic baffles
• Silencer liner

Conasorb F is easy to apply and can be cut with common utility knives.
For secure and permanent installations use specified adhesives.

Thickness and Standard Dimensions

F-50: 0.5 in. thick, F-100: 1.0 in., F-200: 2.0 in.

Sheets: 60” wide X 72”, untrimmed (30 sq. ft.)
Rolls: 60” wide rolls (F-50 and F-100 only)
*CUSTOM TRIMMING AND DIE CUTTING CAN BE PROVIDED

Conasorb UF

CONASORB UF is a combination of a 1.5 mil. urethane film bonded to a polyester polyurethane acoustic foam. The black urethane film finish is extremely durable due to its highly elastic properties and is resistant to mechanical damage. This finish is suitable for very dirty environments and will withstand direct contact with water and most fluids found in industrial environments such as oils and cutting fluids.

Uses

• Machine Guarding Liner
• Engine Compartments
• Enclosure and Silencer Liner

Conasorb UF is easy to apply and can be cut with common utility knives.
For secure and permanent installations use specified adhesive.

Thickness and Standard Dimensions

STANDARD DIMENSIONS
Sheets: 54” wide X 72”, untrimmed (27 sq. ft.)
Rolls: 54” wide rolls (UF-50 and UF-100 only)

Conasorb V

Conasorb V is a combination of a perforated vinyl film bonded to a polyester polyurethane foam. The perforated vinyl film provides a scuff and wear resistant surface that is suitable for dusty or moderately dirty environments where it is not exposed to contaminants such as direct oil or water spray.

Conasorb V is ideal as an enclosure or room surface absorber where a functionally attractive and cleanable surface is desired. The vinyl film surface is available standard beige, gray or black.

Uses

• Enclosure Liner
• Room Surface Absorber
• Equipment Cab Liner
• Silencer Liner

Conasorb V is easy to apply and can be cut with common utility knives.
For secure and permanent installations use specified adhesive.

Thickness and Standard Dimensions

V-50: 0.5 in. thick, V-100: 1.0 in., V-200: 2.0 in.

Sheets: 54” wide X 72”, untrimmed (27 sq. ft.)
Rolls: 54” wide rolls (V-50 and V-100 only)